A worker fitting roof sheeting at midday, a welder beside hot steel, and a warehouse picker working under poor ventilation can all face the same risk: their body cannot shed heat quickly enough. Effective heat stress prevention is not simply a matter of putting water on site. It requires planned work, suitable PPE and clothing, attentive supervision, and a clear response before discomfort becomes a medical emergency.
For South African employers, heat exposure can rise sharply during summer, but outdoor temperature is only part of the picture. Humidity, direct sunlight, radiant heat from equipment or surfaces, physical effort, restricted airflow and protective garments can combine to create hazardous conditions. A reliable control plan protects workers while helping teams maintain safe, consistent output.
Understand where heat exposure starts
Heat stress occurs when the body gains more heat than it can lose. Sweating is one of the body’s main cooling mechanisms, but it becomes less effective in humid conditions or where clothing prevents moisture from evaporating. Workers may also begin a shift already dehydrated, tired, unwell or unaccustomed to the heat.
High-risk environments include construction sites, foundries, welding areas, manufacturing plants, mines, roadworks, farms, security posts and logistics yards. Indoor work deserves equal attention. A poorly ventilated workshop, a boiler room or a warehouse with a hot roof can present a serious exposure even when there is no direct sun.
A practical assessment should look beyond the weather forecast. Consider the task, shift length, work rate, heat sources, airflow, shade, available drinking water and the clothing or respiratory protection required. Speak to supervisors and workers as well. They often know where heat builds up, when workloads peak, and which tasks leave people struggling to recover.
Build heat stress prevention into the work plan
The strongest controls reduce exposure before relying on individual behaviour. Where possible, schedule the heaviest physical work for cooler parts of the day, rotate employees through hot tasks and allow recovery breaks in a shaded or cooled area. This may affect short-term scheduling, but it is generally less disruptive than heat-related illness, lost time or an incident that stops the job.
Engineering and site controls can make a measurable difference. Temporary shade, screened rest areas, fans, natural ventilation and insulation around heat-generating equipment may all help, depending on the workplace. Fans are useful where air temperature allows sweat to evaporate, but they are not a complete answer in extreme heat or very humid conditions. They should support a broader plan, not replace it.
Hydration arrangements need to be convenient and dependable. Provide cool, clean drinking water close to the work area, ensure supplies are replenished, and encourage workers to drink regularly rather than waiting until they feel thirsty. Supervisors should plan water access around travel distances, remote work areas and shift changes. Alcohol the night before, excess caffeine, illness and certain medication can also increase dehydration risk, so a respectful worker-awareness programme is worthwhile.
New starters, workers returning after leave, and employees moved into hotter jobs require particular care. Acclimatisation takes time. A gradual increase in heat exposure and workload allows the body to adapt more safely. Sending an unacclimatised person straight into a demanding hot task simply because a deadline is tight is a poor trade-off.
Select protective clothing with heat in mind
PPE is essential in many high-risk roles, yet some protective equipment can trap heat and limit evaporation. This does not mean required protection should be removed. It means the clothing system, task design and recovery time must be considered together.
For outdoor work, lightweight, breathable workwear with appropriate coverage can help protect against sun exposure while allowing better air movement. Broad-brimmed neck protection or suitable hard-hat attachments may be appropriate where they do not interfere with other PPE or the task. UV-rated eye protection is also valuable for glare and outdoor visibility.
Specialist applications require more careful balancing. Welders need garments that protect against sparks, molten metal and radiant heat. Workers exposed to arc-flash hazards need correctly specified arc-rated clothing. Chemical splash protection, disposable coveralls, respirators and certain gloves can all increase heat load. The answer is not to downgrade PPE for comfort. Instead, review whether garments are correctly sized, whether layers are necessary for the task, whether breaks are adequate, and whether work can be reorganised to reduce time in the hottest conditions.
Poor fit adds another problem. Oversized garments may snag or restrict movement; overly tight garments can reduce comfort and airflow. Procurement teams should consider sizing availability, fabric performance, durability and wash requirements alongside the protection standard. Issuing compliant PPE is only the first step. It must remain wearable enough for workers to use correctly throughout the shift.
GHS Health & Safety CC can assist organisations in matching dependable workwear and PPE categories to their operational risks, including specialist welding, rain, disposable and protective clothing requirements.
Train supervisors to recognise early warning signs
Heat illness rarely appears without warning, but early symptoms are easily dismissed as fatigue or poor attitude. Workers and supervisors should know to act when someone reports headache, dizziness, unusual tiredness, nausea, cramps, excessive thirst, weakness or difficulty concentrating. Heavy sweating may occur, but do not assume a person is safe because they are sweating.
Heat exhaustion needs prompt action. Move the person to a cool or shaded area, loosen unnecessary clothing or equipment where safe, cool them with airflow and cool wet cloths, and provide small amounts of water only if they are fully alert and able to drink. Do not leave them alone, and do not send them back to work simply because they say they feel better.
Heat stroke is a medical emergency. Confusion, collapse, seizures, altered behaviour, loss of consciousness or hot skin are serious warning signs. Call emergency medical assistance immediately, begin active cooling while help is arranged, and follow the site emergency procedure. Do not give fluids to an unconscious, confused or vomiting person. Fast escalation matters because heat stroke can cause severe injury or death.
A buddy system is useful for isolated work, vehicle crews and high-heat tasks. People do not always recognise their own symptoms, particularly when focused on production targets. A colleague who notices slowed responses, poor coordination or unusual behaviour may prevent a serious incident.
Make supervision practical, not punitive
Heat controls fail when workers believe breaks will be viewed as weakness or delay. Supervisors set the tone. They should check conditions at the start of a shift and again as temperatures, production demands or work locations change. Brief, regular conversations often reveal problems before formal incident reporting does.
Use a simple daily heat plan that identifies hot tasks, available shaded recovery areas, water arrangements, staffing levels and the person responsible for escalation. On particularly hot days, reduce non-essential exertion where practical and monitor workers with heavy PPE, strenuous roles or limited access to ventilation more closely.
Record heat-related reports, first-aid cases, near misses and patterns of absenteeism. These records can show that a specific job, area or garment combination needs attention. They also support more informed procurement decisions, rather than replacing equipment only after an avoidable failure.
Treat heat as an operational risk
Heat stress prevention is a shared responsibility between management, supervisors and workers. Management must provide resources and sensible planning; supervisors must apply controls consistently; workers must use issued PPE correctly, take planned recovery breaks and report symptoms early.
The most effective sites do not wait for a heatwave to find out whether their controls work. They make water, shade, suitable protective clothing and emergency action part of everyday site readiness. When the next hot shift arrives, workers should already know where to cool down, whom to tell and what support is available.
